This where a low pressure, (0-3psi) gauge would tell you what pressure your system was developing. You may think you have set your pressuretrol down to its lowest setting, only to discover it is faul… (View Post)
I think there is only great disappointment that a manufacturer would alter the design in such a way as to make it more difficult to install, and then not making that change more known before the boil… (View Post)
I would invest in proper main venting and insulation first.
Add a 0-3 psi gauge so you can see the pressure during the venting phase as the air is being pushed out. I feel the calculations of pipe si… (View Post)
Look in this "steam survey" from Peerless, and on page 2 it shows the correct piping for a counterflow system. This will prevent condensate from dripping down the risers directly into the boiler.--NB… (View Post)