to Find a Contractor in your area.
are the website rules, as well as some tips for using this forum.
Need to contact us? Visit
Re: Bad propane
> @SuperTech said: > > @mikeg2015 said: > > Had a issue on a Navien Combi startup last week. Had an ignition issue. Once I got that changed, there was air in the propane. Must have not…
Re: Probe vs. Float low water cut off
I had a probe and needed the tapping for a aquastat so went back to a float. I trust it just a bit more for some reason. Although a clot sticking is most likely than a probe failure.
Re: Geothermal Water Furnace Grundfas pump locked up
We are in the process of replacing 2 of those now. Those are normally pressurized flow centers too, so you may need a flush cart to purge i when replacing hte pumps.... unlike with an atmospheric sys…
Re: Water heater
(Quote) Usually its to install an electric heater if there’s an breaker panel nearby. Probably use 14ga on a 30A circuit for that too.
Re: Looking for document or Lit about overspeeding pumps
Still need ot extrapolate the pump curve. Could run out of HP on the motor itself. Also need to look at suction piping and overall pipe size.
It looks like you're new here. If you want to get involved, click one of these buttons!
Like Us on Facebook
Follow Us on Twitter
Watch Us on YouTube