Click here to Find a Contractor in your area.
Welcome! Here are the website rules, as well as some tips for using this forum.
Need to contact us? Visit https://heatinghelp.com/contact-us/.

bsilliman

The previous owner of the house had continuously kicked the pvc pipping connected to the condensation pan, cracking the male end off. I replaced and sealed it and even pitched the pan towards the drain. Now I'm running into two problems. 1) there is smell of garbage coming from the vents that was not there to begin with, most likely to the standing water that was in the pan or water that is sitting in the blower motor caging. 2) the blower in the furnace is now blowing the the water straight out of the pan and against the duct. I would slow down the motor but the wires go into a (I always forget the name of this) white plug that connects to the IFC board, so I'm afraid of cutting the the wires in an attempt to slowdown the blower motor. PLEASE HELP, its hot as hell!!!!

About

Username
bsilliman
Joined
Visits
5
Last Active
Roles
Member
Points
2
Badges
1
Posts
2

Welcome

It looks like you're new here. If you want to get involved, click one of these buttons!

Badges

First Comment