Click here to Find a Contractor in your area.
Welcome! Here are the website rules, as well as some tips for using this forum.
Need to contact us? Visit https://heatinghelp.com/contact-us/.
- Last Active
Regarding the size of your boiler--the input value is the gas that goes into the boiler, not what's available for the radiators. The boiler probably operates at around 80% efficiency, so the 262,500x… (View Post)1
I found the original proposal from Henry Ray. It looks like he proposed 505 SF boiler for 385 SF of radiation. It's hard to read but I think it says: Boiler @ 505. Heating *****. All Corto Radiation.… (View Post)1
Also, if the vent failed it's for a reason. The vent doesn't look that old. Water hammer might have damaged it. You don't want to put your new vents on just so they can get damaged too. Do you have r… (View Post)1
@drewbert41 I'd recommend getting a crescent wrench or open ended wrench and try that on the hex portion before using heat. From your photo, it doesn't look like it's threaded that far in. Applying t… (View Post)1