The only way to remove TDS is through blowdown of boiler. Making up with demineralized water to boiler with high TDS and a system loss through steam or condensate side would equal no change in boile… (View Post)
Are you meaning the concentric taper on the threads? NPT is 3/4" per foot taper threads.
If you actually mean an of center thread...
A standard pipe threader cannot cut eccentric or off center thre… (View Post)
Feel like a bit of an A$% on the previous post. Always just assumed they were thermocouples. After reading, the timing of a thermocouple for this would be inappropriate for instant feedback.
As pe… (View Post)
As ice sailor mentioned West epoxy is one of the most popular in the marine field followed by System Three. They both offer the best in wide range application epoxy. But when it comes to industrial… (View Post)