Click here to Find a Contractor in your area.
Welcome! Here are the website rules, as well as some tips for using this forum.
Need to contact us? Visit https://heatinghelp.com/contact-us/.
- Jean-David Beyer
- Last Active
When I had a temperature mixing valve installed at the output of my indirect fired hot water heater so I could run it at 140F, I hired a plumber to install the valve and related piping (including two… (View Post)1
If you try to answer the wrong question, all kinds of misunderstanding can ensue. Even if a homeowner asks what the efficiency of if a proposed heating system is, presumably what he really wants to k… (View Post)1
I do not, since I am not a heating contractor. But the contractor that installed my mod-con did lose track. They put purple primer on the exhaust, but forgot to put the glue in. Later, the condensate… (View Post)1
In my experience as a homeowner with a radiant slab at grade, the improvement in comfort with outdoor reset is desirable. My old boiler did not have any reset and pumped a constant SWT whenever there… (View Post)1
I am in New Jersey, have an indirect with a shutoff valve both on the cold water input and on the delivery to the house. It did pass inspection, but the inspector would pass anything. He passed that … (View Post)1