Click here to Find a Contractor in your area.
Welcome! Here are the website rules, as well as some tips for using this forum.
Need to contact us? Visit https://heatinghelp.com/contact-us/.
- Last Active
That fitting is indeed suppose to shut off the water when the expansion tank is un-screwed. I personally have tossed them when they have found their way into my hands and have used a threaded ball va… (View Post)1
Woodford and Prier both made in the US. I believe Prier is the old Mansfield faucet. If your looking for H & C Woodford is the one to get. (View Post)1
Yes. You disturbed sediment internally that is now stuck in the flow switch. Best bet is to try and run a hose off the hot side service port and blast it quick and hard. Last one we flushed did the s… (View Post)2
That there is a recessed wall convector. They have always been recessed in the wall.... at least all of the one's I've seen.... Your missing the covers.. back and front. That fin is suppose to be sit… (View Post)2
If the furnace doesn't have enough combustion air for the burner that is not a good thing... You could do a fan in the can but there is a better option... from the same company that makes the fan in … (View Post)1