Click here to Find a Contractor in your area.
Welcome! Here are the website rules, as well as some tips for using this forum.

If you've found help here, check back in to let us know how everything worked out.
It's a great way to thank those who helped you.
Need to contact us? Visit https://heatinghelp.com/contact-us/.

newbie2this

About

Username
newbie2this
Joined
Visits
0
Last Active
-
Roles
Member
Badges
0
Posts
18

Comments

  • Nice! Touche Mark Touche! LOL!
  • Combustion test testo 330-1LL 543 stack temp 8.67 co2 79.3 EFF 75.9 ExAir 9.4 Oxygen 7 ppm CO 13 undiluted CO -.044 inH2O draft Smoke zero Looks like it tested OK thanks Mark for your input But of course this was done before I installed …
  • I am a Tech Also forgot to mention that I am an access control technician and very familiar with relays and controls for door access etc, so these controls are very basic to me, and safety goes w/o saying as I have no desire to call the fire dept. …
  • Safety always taken into consideration Thanks for the advice, just an FYI I've already done the safety checks i.e pulled the cad cell leads and it shut down, also jumpered the FF terminals just for fun.  I also turned my aquastat down after my heat…
  • Krazy I wire door access control relays for a living and know my way around the relay world. Also quite proficient with a volt/ohm meter, and this aint rocket science.  Was just wanting the easy explanation from an experienced person... Thanks, …
  • Honeywell Control I looked at the R8182D and F model, but I have nine cast radiators in my house on a circulator, and they're on the same zone, so just putting an R4184G with photocell would be cheaper, and do the same thing.  Just want to know if …
  • Honeywell Control I have and old surface mounted honeywell minneapolis LX aquastat external mounted, wired back to my R845A and then going to my R117A stack contoller. I would like to replace my R117A with a R4184G and use a photocell that looks a…
  • Installation company help To all that reccommended Frank and Gordo thanks a million!  I have called and left a message on their answering machine, and will post a follow-up how it goes! Newbie
  • Condensing boiler with indirect DHW Thanks for your input, I have a design salesman coming by this week that sell the Viessmann to give me an estimate, I was wondering if you know or have networked with any reputable installation companies in my ar…
  • Prestige System upgrade Thanks for your reply, I currently have 9 radiators, (one zone) with a recirculating pump, and 1 bath, 1 kitchen sink, and plans to add 1 more full bath. I see no need to change the one zone system for my heat, and am OK wi…
Avatar

Welcome

It looks like you're new here. If you want to get involved, click one of these buttons!

Badges

Any minute now…