Welcome! Here are the website rules, as well as some tips for using this forum.
Need to contact us? Visit https://heatinghelp.com/contact-us/.
Click here to Find a Contractor in your area.
EDR for radiator
Mark_7
Member Posts: 123
Looking for EDR rating for a radiator that looks like a slender style but the center is open and has a cast iron element in the center. Any ideas/
0
Comments
-
Burnhams heating helper has charts for sizing obsolete radiators that could get you close, I believe I got my copy downloading it from there website.0 -
Sounds like
one of the ones with an internal finned convector. You won't find that in the Burnham literature that I have seen.
Steamhead and others know more about that type, probably the day of the week it was made if my memory serves0
This discussion has been closed.
Categories
- All Categories
- 85.2K THE MAIN WALL
- 3.1K A-C, Heat Pumps & Refrigeration
- 55 Biomass
- 424 Carbon Monoxide Awareness
- 72 Chimneys & Flues
- 1.9K Domestic Hot Water
- 5.2K Gas Heating
- 129 Geothermal
- 160 Indoor-Air Quality
- 3.3K Oil Heating
- 60 Pipe Deterioration
- 878 Plumbing
- 5.9K Radiant Heating
- 375 Solar
- 14.6K Strictly Steam
- 3.2K Thermostats and Controls
- 58 Water Quality
- 49 Industry Classes
- 89 Job Opportunities
- 28 Recall Announcements