Welcome! Here are the website rules, as well as some tips for using this forum.
Need to contact us? Visit https://heatinghelp.com/contact-us/.
Click here to Find a Contractor in your area.

Radiators

Al Letellier
Al Letellier Member Posts: 781
wander off the wall and check the library or Dan's books. Rating sheets abound.

<A HREF="http://www.heatinghelp.com/getListed.cfm?id=248&Step=30">To Learn More About This Professional, Click Here to Visit Their Ad in "Find A Professional"</A>

Comments

  • S Davis
    S Davis Member Posts: 491
    Radiator Output

    I have a job that the owner is reusing the cast Rads they are hot water and made by the American Radiator Co.
    Anyone know where I can get output ratings for them.

    Thanks


    S Davis

    Apex Radiant Heating
  • S Davis
    S Davis Member Posts: 491
    Rads

    I looked In the Library but could not find anything also did a search, anyone have any ideas?

    Thanks,

    S Davis

    Apex Radiant Heating
  • Steamhead
    Steamhead Member Posts: 16,796
    They're in Dan's book \"E.D.R.\"

    unless they're the Corto units with a section width of 2 inches, rather than the usual 2-1/2 inches. If you have the 2-inchers, I have the charts.
    All Steamed Up, Inc.
    Towson, MD, USA
    Steam, Vapor & Hot-Water Heating Specialists
    Oil & Gas Burner Service
    Consulting
This discussion has been closed.