Munchie control for

leo g_13 · May 2004

is needed to have a munchie run infloor, panel rads and the domestic HW?

leo g

PS - HTP when ya gonna send Chuck up here to Vancouver for a training seminar? We're getting way behind on all of your new-fangled controls/strategies! :O~

<A HREF="http://www.heatinghelp.com/getListed.cfm?id=286&Step=30">To Learn More About This Professional, Click Here to Visit Their Ad in "Find A Professional"</A>

Mark Hunt · May 2004

Vision 1 control

Lets you control the indirect and a heating circuit.

Program the boiler around the highest heating circuit temp and mix down for the lower temps.

The control will automatically priortize the DHW and will go into high fire whenever that zone calls.

Mark H

To Learn More About This Professional, Click Here to Visit Their Ad in "Find A Professional"

leo g_13 · May 2004

Mark

so something like a 3-way mixing for the radiant, and as the panel rad temps go up and down, the radiant will follow suit?

leo g

To Learn More About This Professional, Click Here to Visit Their Ad in "Find A Professional"

Mark Hunt · May 2004

That would work

You got it.

Mark H

To Learn More About This Professional, Click Here to Visit Their Ad in "Find A Professional"

leo g_13 · May 2004

Thanx!

Mark

leo g

To Learn More About This Professional, Click Here to Visit Their Ad in "Find A Professional"

beeper · May 2004

Training in Canada is being done by our rep at this point

His name is Steve Cambria of Gas Solutions in Markham Ontario Call tech support for his number and e mail address so you can contact him.

leo g_13 · May 2004

But we want

CHUCK!!!

~

leo g

Thanx! Jeffrey, I will bug Roger @ MPH to get Steve out here if you really can't spare Chuck. Hmmm, the salmon are just starting to run.....

To Learn More About This Professional, Click Here to Visit Their Ad in "Find A Professional"

jw · May 2004

Vision II

This will be the control for multi temp zones when they get it ready to market.

Munchie control for

Comments

Categories