Welcome! Here are the website rules, as well as some tips for using this forum.
Need to contact us? Visit https://heatinghelp.com/contact-us/.
Click here to Find a Contractor in your area.

5 hours, 2 pieces

Options
Mike T., Swampeast MO
Mike T., Swampeast MO Member Posts: 6,928
in THE MAIN WALL
And it would have been longer had I not used the drywall router left from the days when I thought rock would be "fun" and even profitable! Spoiled the first piece 'cause I forgot that the ceiling sloped (for condensate from steam generator) DESPITE the fact that I was cutting for the drip edge a few inches away from the control wall! Duh! (Only way to slope the ceiling, otherwise on seated people, door or glass block window.)

No wonder these things cost a fortune.

Comments

  • eleft_4
    eleft_4 Member Posts: 509
    Options


    Mike,

    Don't worry about the time. You think enough about your trade to take it apart and start again. Not to much of that going on these days. If it's not right what good would it be anyway.

    Sometimes I wonder if the trades are diluting "level, square & plump" as in "truth and politics"

    .nice job & good thinking


    al
This discussion has been closed.

Categories