Welcome! Here are the website rules, as well as some tips for using this forum.
Need to contact us? Visit https://heatinghelp.com/contact-us/.
Click here to Find a Contractor in your area.
What kind of circulator is this?
Options
Huuyz11
Member Posts: 2
Looking the replace the circulator that feeds my Smart40 indirect, it's been making noise, very hot, slow hot water, I think because the aquastat on the tank died and it's been running 24/7 for a good year now. I've never seen this kind before with the holes, no taco label.
Wondering if I can replace this with a 007-F5 or if I need something bigger because it's and indirect, and if I need IFC on an indirect. My other 2 zones in the house are being feed by 007-F5.
Thanks
Wondering if I can replace this with a 007-F5 or if I need something bigger because it's and indirect, and if I need IFC on an indirect. My other 2 zones in the house are being feed by 007-F5.
Thanks
0
Comments
-
It looks like a 007.Bob Boan
You can choose to do what you want, but you cannot choose the consequences.0 -
-
-
Categories
- All Categories
- 85.7K THE MAIN WALL
- 3K A-C, Heat Pumps & Refrigeration
- 51 Biomass
- 423 Carbon Monoxide Awareness
- 71 Chimneys & Flues
- 1.9K Domestic Hot Water
- 5.2K Gas Heating
- 92 Geothermal
- 149 Indoor-Air Quality
- 3.2K Oil Heating
- 60 Pipe Deterioration
- 850 Plumbing
- 5.8K Radiant Heating
- 375 Solar
- 14.5K Strictly Steam
- 3.2K Thermostats and Controls
- 51 Water Quality
- 38 Industry Classes
- 55 Job Opportunities
- 18 Recall Announcements