Welcome! Here are the website rules, as well as some tips for using this forum.
Need to contact us? Visit https://heatinghelp.com/contact-us/.
Click here to Find a Contractor in your area.
Honeywell Gas valve
Tonypositive
Member Posts: 14
Hi there, I have a Burnham that was under some water. I replaced the 8124E, a switching relay and a gas valve. The old one was a VR800C 1166, the new one is a VR8300C 1506. The old one had a sort of jumper, the new one doesn't. The gas valve won't open up. Ironically, I fired it up yesterday with the old valve and 8124. Just throwing it out there before I head back tomorrow.
0
Comments
-
Turn the gas off and power off to that boiler. At the very least ALL controls MUST BE REPLACED. No exceptions.
Get a qualified technician to assess your situation.
This is how houses blow up......
D0 -
Umm I am, I did. I was talking about the gas valve. 👍🏻0
Categories
- All Categories
- 85.2K THE MAIN WALL
- 3.1K A-C, Heat Pumps & Refrigeration
- 55 Biomass
- 424 Carbon Monoxide Awareness
- 72 Chimneys & Flues
- 1.9K Domestic Hot Water
- 5.2K Gas Heating
- 129 Geothermal
- 160 Indoor-Air Quality
- 3.3K Oil Heating
- 60 Pipe Deterioration
- 878 Plumbing
- 5.9K Radiant Heating
- 375 Solar
- 14.6K Strictly Steam
- 3.2K Thermostats and Controls
- 58 Water Quality
- 49 Industry Classes
- 89 Job Opportunities
- 28 Recall Announcements