Welcome! Here are the website rules, as well as some tips for using this forum.
Need to contact us? Visit https://heatinghelp.com/contact-us/.
Click here to Find a Contractor in your area.
Attach new hot water boiler to existing 5 zone system
Options
razzor
Member Posts: 20
I need to replace my leaking Burnham boiler. Can I just cut the old one out and fit in the new boiler using existing piping and circulatory? Thanks.
0
Comments
-
Sure you can. Is it right? Who knows?
What model Burnham? How old?
Higher AFUE and needs a stainless chimney liner?
The existing piping and controls might work but are they correct, like pumping away?
Is this a DIY job?
If a contractor is doing the job, who's responsible if the circulator dies the next day?
Some pics would determine if its feasible.2
Categories
- All Categories
- 85.6K THE MAIN WALL
- 3K A-C, Heat Pumps & Refrigeration
- 51 Biomass
- 423 Carbon Monoxide Awareness
- 71 Chimneys & Flues
- 1.9K Domestic Hot Water
- 5.2K Gas Heating
- 92 Geothermal
- 149 Indoor-Air Quality
- 3.2K Oil Heating
- 60 Pipe Deterioration
- 850 Plumbing
- 5.8K Radiant Heating
- 375 Solar
- 14.5K Strictly Steam
- 3.2K Thermostats and Controls
- 51 Water Quality
- 38 Industry Classes
- 55 Job Opportunities
- 18 Recall Announcements