Welcome! Here are the website rules, as well as some tips for using this forum.
Need to contact us? Visit https://heatinghelp.com/contact-us/.
Click here to Find a Contractor in your area.
L. P. Gas piping sizing
Options
bean
Member Posts: 34
Can anyone offer some assistance on helping me size L.P. gas line for higher pressure systems? (10 -90 psi) Also on lower pressure systems (11 " W.C.) Thanks for the help!!
0
Comments
-
90 psi? Is this a commercial system and if so are you planning vaporizers? and yes..either message me or post it here we can work out the line sizing easy enough..
0 -
For normal piping setups you can just use the chart in the fuel code. https://codes.iccsafe.org/public/document/IFGC2018/chapter-4-gas-piping-installations
If you want to figure out odd ones, try using the enginnering tool box for natural gas and change the specific gravity to 1.5 for propane.
https://www.engineeringtoolbox.com/natural-gas-pipe-calculator-d_1042.html"If you can't explain it simply, you don't understand it well enough"
Albert Einstein0 -
need btu loads and length of pipe, ie a diagram of what you are doing"The bitter taste of a poor install lasts far longer than the JOY of the lowest price"0
Categories
- All Categories
- 85.7K THE MAIN WALL
- 3K A-C, Heat Pumps & Refrigeration
- 51 Biomass
- 423 Carbon Monoxide Awareness
- 71 Chimneys & Flues
- 1.9K Domestic Hot Water
- 5.2K Gas Heating
- 92 Geothermal
- 149 Indoor-Air Quality
- 3.2K Oil Heating
- 59 Pipe Deterioration
- 850 Plumbing
- 5.8K Radiant Heating
- 371 Solar
- 14.5K Strictly Steam
- 3.2K Thermostats and Controls
- 51 Water Quality
- 38 Industry Classes
- 55 Job Opportunities
- 18 Recall Announcements