Welcome! Here are the website rules, as well as some tips for using this forum.
Need to contact us? Visit https://heatinghelp.com/contact-us/.
Click here to Find a Contractor in your area.
What wrench to use for this spud?
Options
steamhouse
Member Posts: 41
What wrench do I need to attach this spud? It does not have the nubs that a traditional spud uses. Thanks.
0
Comments
-
-
Where can I get one? Could you recommend a site online?0
-
Try a 3/8" socket wrench extension.All Steamed Up, Inc.
Towson, MD, USA
Steam, Vapor & Hot-Water Heating Specialists
Oil & Gas Burner Service
Consulting0 -
or a 1/2 " socket extension or a square seat wrench used for faucets with washers and seats.To learn more about this professional, click here to visit their ad in Find A Contractor.0
-
Yes. Socket it was0
-
or square stock grind until it fits0
-
Dependant on what size spud it is you may find that the corresponding size black iron plug may work. You put the plug into a coupling and thread it in that way. Just a thought.
There was an error rendering this rich post.
0
Categories
- All Categories
- 85.7K THE MAIN WALL
- 3K A-C, Heat Pumps & Refrigeration
- 51 Biomass
- 423 Carbon Monoxide Awareness
- 71 Chimneys & Flues
- 1.9K Domestic Hot Water
- 5.2K Gas Heating
- 92 Geothermal
- 149 Indoor-Air Quality
- 3.2K Oil Heating
- 59 Pipe Deterioration
- 850 Plumbing
- 5.8K Radiant Heating
- 371 Solar
- 14.5K Strictly Steam
- 3.2K Thermostats and Controls
- 51 Water Quality
- 38 Industry Classes
- 55 Job Opportunities
- 18 Recall Announcements