Welcome! Here are the website rules, as well as some tips for using this forum.
Need to contact us? Visit https://heatinghelp.com/contact-us/.
Click here to Find a Contractor in your area.

What wrench to use for this spud?

What wrench do I need to attach this spud? It does not have the nubs that a traditional spud uses. Thanks.

Comments

  • EzzyT
    EzzyT Member Posts: 1,294
    A torc tip should work
    E-Travis Mechanical LLC
    Etravismechanical@gmail.com
    201-887-8856
    steamhouse
  • steamhouse
    steamhouse Member Posts: 41
    Where can I get one? Could you recommend a site online?
  • Steamhead
    Steamhead Member Posts: 16,796
    Try a 3/8" socket wrench extension.
    All Steamed Up, Inc.
    Towson, MD, USA
    Steam, Vapor & Hot-Water Heating Specialists
    Oil & Gas Burner Service
    Consulting
  • The Steam Whisperer
    The Steam Whisperer Member Posts: 1,215
    or a 1/2 " socket extension or a square seat wrench used for faucets with washers and seats.
    To learn more about this professional, click here to visit their ad in Find A Contractor.
  • steamhouse
    steamhouse Member Posts: 41
    Yes. Socket it was
  • EBEBRATT-Ed
    EBEBRATT-Ed Member Posts: 15,453
    or square stock grind until it fits
  • mars_6
    mars_6 Member Posts: 107
    Dependant on what size spud it is you may find that the corresponding size black iron plug may work. You put the plug into a coupling and thread it in that way. Just a thought.
    Matt Rossi