Welcome! Here are the website rules, as well as some tips for using this forum.
Need to contact us? Visit https://heatinghelp.com/contact-us/.
Click here to Find a Contractor in your area.

Spirovent

Options
happydave
happydave Member Posts: 79
in THE MAIN WALL
Has anyone changed just the top of a Spirovent? I have one on a system that is not working/weeping/corroded. I'm going to flush the system of old antifreeze (previous service company never checked it) and refill as needed. I can't change the complete Spirovent as it's piped in steel into the circulator manifold (8 zones). Thought about splitting a new unit and swapping the top. Thanks

Comments

  • kcopp
    kcopp Member Posts: 4,432
    edited February 2017
    Options
    Yes. use a razor knife to split the seal 1st. Then get a couple good wrenches.
    happydave
  • Ironman
    Ironman Member Posts: 7,376
    Options
    You can remove all the internals and swap them.
    Bob Boan
    You can choose to do what you want, but you cannot choose the consequences.
    happydave
  • Terry O
    Terry O Member Posts: 67
    Options
    PJR000HA Replacement JR assy
    Terry O
    happydave

Categories