Welcome! Here are the website rules, as well as some tips for using this forum.
Need to contact us? Visit https://heatinghelp.com/contact-us/.
Click here to Find a Contractor in your area.
Opinions on delavan in line filters
Options
wmechanic01
Member Posts: 26
Are they worth it on a small nozzle size or will these just plug instead of a nozzle ?
0
Comments
-
-
I've had excellent luck with what @STEVEusaPA said. Add a vacuum gauge on spin-on and you have the best system I can think of.
You could also run a nozzle filter, and just inspect it with annual cleaning. Nothing should get by the dual filters, but what's a little extra insurance? I just may not change it if it looks good.
YMMVServing Northern Maine HVAC & Controls. I burn wood, it smells good!0
Categories
- All Categories
- 85.7K THE MAIN WALL
- 3K A-C, Heat Pumps & Refrigeration
- 51 Biomass
- 423 Carbon Monoxide Awareness
- 71 Chimneys & Flues
- 1.9K Domestic Hot Water
- 5.2K Gas Heating
- 92 Geothermal
- 149 Indoor-Air Quality
- 3.2K Oil Heating
- 59 Pipe Deterioration
- 850 Plumbing
- 5.8K Radiant Heating
- 371 Solar
- 14.5K Strictly Steam
- 3.2K Thermostats and Controls
- 51 Water Quality
- 38 Industry Classes
- 55 Job Opportunities
- 18 Recall Announcements