Welcome! Here are the website rules, as well as some tips for using this forum.
Need to contact us? Visit https://heatinghelp.com/contact-us/.
Click here to Find a Contractor in your area.

Prefabbed header

Dave0176
Dave0176 Member Posts: 1,177
Got a oil to gas replacement coming up, so tonight was a good nite to fab up the header. It's a little guy with just 3" two 2" boiler risers and one 3 supply. I'm so used to 4" headers this thing seems like a pee shooter to me right now lol. And the new employee was on the job.

DL Mechanical LLC Heating, Cooling and Plumbing 732-266-5386
NJ Master HVACR Lic# 4630
Specializing in Steam Heating, Serving the residents of New Jersey
https://heatinghelp.com/find-a-contractor/detail/dl-mechanical-llc

https://m.facebook.com/DL-Mechanical-LLC-315309995326627/?ref=content_filter

I cannot force people to spend money, I can only suggest how to spend it wisely.......
LionA29Paul S_3Turbo Daveb_bzjonny88ChrisJBrianT1077

Comments

  • EzzyT
    EzzyT Member Posts: 1,294
    Nice prefab @Dave0176. Going to be some dry steam in that system
    E-Travis Mechanical LLC
    Etravismechanical@gmail.com
    201-887-8856
  • BobC
    BobC Member Posts: 5,476
    Get them young and train them right!

    Bob
    Smith G8-3 with EZ Gas @ 90,000 BTU, Single pipe steam
    Vaporstat with a 12oz cut-out and 4oz cut-in
    3PSI gauge
    Turbo Dave
  • Fred
    Fred Member Posts: 8,542
    edited September 2016
    Nice! Great helper Too. I could never find my kid when there was work to be done!
    LionA29
  • Paul S_3
    Paul S_3 Member Posts: 1,261
    nice header @Dave0176
    ASM Mechanical Company
    Located in Staten Island NY
    Servicing all 5 boroughs of NYC.
    347-692-4777
    ASMMECHANICALCORP@GMAIL.COM
    ASMHVACNYC.COM
    https://heatinghelp.com/find-a-contractor/detail/asm-mechanical-company
  • Two sure ways to spot a professional:




    New England SteamWorks
    Service, Installation, & Restoration of Steam Heating Systems
    newenglandsteamworks.com
    Paul S_3
  • warno
    warno Member Posts: 229
    Those hand held threaders are man eaters. You gotta wear your big boy pants to hang on to those. At least in my experience.

    I agree on the child labor. Teaches them things. I still remember helping my dad from a very young age.
  • BobC
    BobC Member Posts: 5,476
    It's important for kids to get a chance to use tools when they are young, it helps develop a well rounded person.

    It amazed me when i retired and realized there are almost no kids outside playing or working on cars after school or on weekends. They are all inside playing games on a computer or doing the social media thing.

    I'm sure the air force appreciates the training this gives potential drone pilots but it bodes ill for society.

    Bob
    Smith G8-3 with EZ Gas @ 90,000 BTU, Single pipe steam
    Vaporstat with a 12oz cut-out and 4oz cut-in
    3PSI gauge
    LionA29SWEI
  • LionA29
    LionA29 Member Posts: 255
    @BobC ... not that I'm old but I was one of those kids outside doing hands on and wanted to learn. Not the same today as you described.
  • BobC
    BobC Member Posts: 5,476
    When I was 13 or 14 I was out helping older teens work on their cars, they got a helping hand and i learned how to replace a muffler, install brake pads, or swap out an engine.

    There was a big old oak at the edge of a field that had an old chain hoist hanging from one of it's lower limbs. That chain hoist was used by everyone when an engine had to come out, every fall it got greased up and wrapped in canvas to keep it going.

    Bob
    Smith G8-3 with EZ Gas @ 90,000 BTU, Single pipe steam
    Vaporstat with a 12oz cut-out and 4oz cut-in
    3PSI gauge
  • ChrisJ
    ChrisJ Member Posts: 15,583
    edited September 2016

    Two sure ways to spot a professional:

    Hey, can I start calling my self a professional then? :)
    I'll teach my son to thread as soon as he can at least hang off of the handle, he's still too small.


    Single pipe quasi-vapor system. Typical operating pressure 0.14 - 0.43 oz. EcoSteam ES-20 Advanced Control for Residential Steam boilers. Rectorseal Steamaster water treatment
  • STEVEusaPA
    STEVEusaPA Member Posts: 6,506
    That kid is way too clean...can we see the 'after' picture.
    It was pretty mandatory as a kid that we were helping my dad, wasn't an option. I even remember carrying shingles up on the roof at 8 years old (3 or so at a time, I wouldn't even want to carry a bundle now)
    steve
  • ChrisJ said:


    Hey, can I start calling my self a professional then? :)

    May as well. Everyone else does!
    New England SteamWorks
    Service, Installation, & Restoration of Steam Heating Systems
    newenglandsteamworks.com
  • Danny Scully
    Danny Scully Member Posts: 1,416
    edited September 2016
    Did he help you with that keg too? :lol: All jokes aside, you should be proud. Very cool @Dave0176
    jonny88
  • Abracadabra
    Abracadabra Member Posts: 1,948
    @Dave0176 , he looks like he's struggling there putting together the header on the vise. I think he needs a cheater on the wrench :)