Welcome! Here are the website rules, as well as some tips for using this forum.
Need to contact us? Visit https://heatinghelp.com/contact-us/.
Click here to Find a Contractor in your area.

downfeed monoflo

Paul S_3
Paul S_3 Member Posts: 1,261
what is the best way to connect radiators on a downfeed monoflo system?
ASM Mechanical Company
Located in Staten Island NY
Servicing all 5 boroughs of NYC.
347-692-4777
ASMMECHANICALCORP@GMAIL.COM
ASMHVACNYC.COM
https://heatinghelp.com/find-a-contractor/detail/asm-mechanical-company

Comments

  • DanHolohan
    DanHolohan Member, Moderator, Administrator Posts: 16,512
    Always use two Monoflo tees on downfeed, and try to get the tees at least the width of the radiator apart.
    Retired and loving it.
  • Paul S_3
    Paul S_3 Member Posts: 1,261
    this job has only one monoflo tee....i was talking about the rad top and bottom....top and top....or bottom and bottom? thanks
    ASM Mechanical Company
    Located in Staten Island NY
    Servicing all 5 boroughs of NYC.
    347-692-4777
    ASMMECHANICALCORP@GMAIL.COM
    ASMHVACNYC.COM
    https://heatinghelp.com/find-a-contractor/detail/asm-mechanical-company
  • Hilly
    Hilly Member Posts: 427
    Bottom / Bottom, and TWO Monoflows. I don't have the science but that has always been my understanding. I'm sure I'll be corrected. But I can say for certain that I have witnessed a lot of downfeed monoflows that haven't worked on one monoflow.
  • DanHolohan
    DanHolohan Member, Moderator, Administrator Posts: 16,512
    If you feed the bottom and return from the top the air will have an easier way out.
    Retired and loving it.
    HillynjtommylchmbSWEI