Welcome! Here are the website rules, as well as some tips for using this forum.
Need to contact us? Visit https://heatinghelp.com/contact-us/.
Click here to Find a Contractor in your area.
Gas Line Welding Colorado
Zman
Member Posts: 7,561
Does anyone have a recommendation for a gas line welding contractor in Colorado.
I have a job requiring about 400' of 6" pipe both above and below ground. The system will have a handful of sub meter manifolds along the way.
Thank in advance.
Carl
I have a job requiring about 400' of 6" pipe both above and below ground. The system will have a handful of sub meter manifolds along the way.
Thank in advance.
Carl
"If you can't explain it simply, you don't understand it well enough"
Albert Einstein
Albert Einstein
0
Comments
-
Contact Pipefitters local 208 Denver CO. they should be able to direct you to a good contractorRJ0
-
For the underground part, can you use polyethylene? You've got to bury it deeper than steel and attach a copper tracer wire along with it, but it sure is easier to install. And it will probably last longer than steel as well.8.33 lbs./gal. x 60 min./hr. x 20°ΔT = 10,000 BTU's/hour
Two btu per sq ft for degree difference for a slab0
Categories
- All Categories
- 85.2K THE MAIN WALL
- 3.1K A-C, Heat Pumps & Refrigeration
- 55 Biomass
- 424 Carbon Monoxide Awareness
- 72 Chimneys & Flues
- 1.9K Domestic Hot Water
- 5.2K Gas Heating
- 129 Geothermal
- 160 Indoor-Air Quality
- 3.3K Oil Heating
- 60 Pipe Deterioration
- 878 Plumbing
- 5.9K Radiant Heating
- 375 Solar
- 14.6K Strictly Steam
- 3.2K Thermostats and Controls
- 58 Water Quality
- 49 Industry Classes
- 89 Job Opportunities
- 28 Recall Announcements