Welcome! Here are the website rules, as well as some tips for using this forum.
Need to contact us? Visit https://heatinghelp.com/contact-us/.
Click here to Find a Contractor in your area.
Vitodens conversion
Paul Pollets
Member Posts: 3,656
Just commissioned this Vitodens B2HA with a 79g Vitocell. The original Edwards steel boiler lasted 63 years. The first phase of heat emitters will heat the basement with 7 Runtal VLX wall panel rads. Phase 2 will be 2 floors of QuickTrac, in a year. Put in new Caleffi zone valves so the system would be trouble free if Phase 2 gets delayed. Distribution and boiler piping will get neoprene insulation.
7
Comments
-
Nice install! @Paul PolletsASM Mechanical Company
Located in Staten Island NY
Servicing all 5 boroughs of NYC.
347-692-4777
ASMMECHANICALCORP@GMAIL.COM
ASMHVACNYC.COM
https://heatinghelp.com/find-a-contractor/detail/asm-mechanical-company0 -
Very Nice!!!
To learn more about this professional, click here to visit their ad in Find A Contractor.0 -
-
Another great job, good on ya!
Thanks for the Caleffi support.Bob "hot rod" Rohr
trainer for Caleffi NA
Living the hydronic dream0
Categories
- All Categories
- 85.2K THE MAIN WALL
- 3.1K A-C, Heat Pumps & Refrigeration
- 55 Biomass
- 424 Carbon Monoxide Awareness
- 72 Chimneys & Flues
- 1.9K Domestic Hot Water
- 5.2K Gas Heating
- 129 Geothermal
- 160 Indoor-Air Quality
- 3.3K Oil Heating
- 60 Pipe Deterioration
- 878 Plumbing
- 5.9K Radiant Heating
- 375 Solar
- 14.6K Strictly Steam
- 3.2K Thermostats and Controls
- 58 Water Quality
- 49 Industry Classes
- 89 Job Opportunities
- 28 Recall Announcements