Welcome! Here are the website rules, as well as some tips for using this forum.
Need to contact us? Visit https://heatinghelp.com/contact-us/.
Click here to Find a Contractor in your area.

What?

Options
ChrisJ
ChrisJ Member Posts: 15,672
in THE MAIN WALL
Ok, I'm not a pro and maybe I'm missing something, but I'm going to guess you're not supposed to use both of those tappings? :*


Single pipe quasi-vapor system. Typical operating pressure 0.14 - 0.43 oz. EcoSteam ES-20 Advanced Control for Residential Steam boilers. Rectorseal Steamaster water treatment
Rich_49

Comments

  • Rich_49
    Rich_49 Member Posts: 2,766
    Options
    I would be more concerned with that well implemented flue .
    You didn't get what you didn't pay for and it will never be what you thought it would .
    Langans Plumbing & Heating LLC
    732-751-1560
    Serving most of New Jersey, Eastern Pa .
    Consultation, Design & Installation anywhere
    Rich McGrath 732-581-3833
  • ChrisJ
    ChrisJ Member Posts: 15,672
    edited July 2015
    Options
    Flue looks like crap, but it seems solid and is done ok.

    Honestly I'm more concerned with the fact he didn't flow nitrogen while brazing and argued that they never do that. I had started a thread about it sometime last year because I was in complete disbelief.

    Told the boss I'd never use the guy again but he keeps using him.
    Single pipe quasi-vapor system. Typical operating pressure 0.14 - 0.43 oz. EcoSteam ES-20 Advanced Control for Residential Steam boilers. Rectorseal Steamaster water treatment
  • JStar
    JStar Member Posts: 2,752
    Options
    The secondary tapping should be brought down to the ground with an open pipe, or have a float-safety installed on it. That way, you'll know when a condensate overflow condition is happening.

Categories