Welcome! Here are the website rules, as well as some tips for using this forum.
Need to contact us? Visit https://heatinghelp.com/contact-us/.
Click here to Find a Contractor in your area.

8 hours of boiler work in 60 seconds.

JohnNY
JohnNY Member Posts: 3,226
Contact John "JohnNY" Cataneo, NYC Master Plumber, Lic 1784
Consulting & Troubleshooting
Heating in NYC or NJ.
Classes
TinmanCanuckerPaul PolletsBob Bona_4

Comments

  • Aaron_in_Maine
    Aaron_in_Maine Member Posts: 315
    Very cool thanks for posting
    Aaron Hamilton Heating
    ahheating@ yahoo.com
    (207)229-7717
  • Mark Eatherton
    Mark Eatherton Member Posts: 5,853
    Cool John. Were those DWV fittings on the old boiler? Thanks for sharing. Would love to see one of these time lapses on Ron Poniatowski's (Ron Junior) jobs. Good job.

    It's not so much a case of "You got what you paid for", as it is a matter of "You DIDN'T get what you DIDN'T pay for, and you're NOT going to get what you thought you were in the way of comfort". Borrowed from Heatboy.
  • These time lapse videos could probably improve the performance of the people doing the work.
    For instance, where is the best place to put that bucket so it is not in the way?
    Will you be filming all jobs in the future?
    Customers can see how much work goes into these jobs, and therefore where their money is going.--NBC
  • JohnNY
    JohnNY Member Posts: 3,226
    edited February 2015
    This is my first foray into the world of Boiler Installation Filmmaking, but I figure The Academy is bound to take notice in 2015.

    Yes, Mark, those were DWV fittings. We see that a lot in the areas in which we work in NJ. Not sure why.
    Contact John "JohnNY" Cataneo, NYC Master Plumber, Lic 1784
    Consulting & Troubleshooting
    Heating in NYC or NJ.
    Classes
  • Abracadabra
    Abracadabra Member Posts: 1,948
    John.. that is freaking awesome.. now i have to go out and setup a dropcam on one of my boiler installs. :p
    JohnNY
  • tim smith
    tim smith Member Posts: 2,752
    I really think putting a music score to the video would be a nice touch John!
    Tinman
  • Jack
    Jack Member Posts: 1,047
    I counted 42 different people on that job. That was quite a crew. I particularly related to the guy who, towards the end walks in from the left with his hands in his pockets. Nice job!
    JohnNY
  • JohnNY
    JohnNY Member Posts: 3,226
    Hahaha. Yes, we've got the two main installers, a removal company I sometimes use, myself and my brother in this video.

    Hatterasguy, I like the 3-pc pumps on low head conversion jobs like this.
    It's just a personal preference based on years of reading about other peoples' success stories converting gravity to forced circulation. I've tend to go that route but did consider the Taco 0010, which might also have worked nicely.
    The Series 100 has a wider volute though.

    All good.
    Contact John "JohnNY" Cataneo, NYC Master Plumber, Lic 1784
    Consulting & Troubleshooting
    Heating in NYC or NJ.
    Classes
  • bob_46
    bob_46 Member Posts: 813
    Good show John. What failed on the old boiler?
    bob
  • Robert O'Connor_12
    Robert O'Connor_12 Member Posts: 728
    Nice!
  • JohnNY
    JohnNY Member Posts: 3,226
    There is a bypass on the primary loop. See it? Just before the tees into the secondary.
    Contact John "JohnNY" Cataneo, NYC Master Plumber, Lic 1784
    Consulting & Troubleshooting
    Heating in NYC or NJ.
    Classes
  • Hilly
    Hilly Member Posts: 427
    Good show, thanks for showing us.
  • Tinman
    Tinman Member Posts: 2,808
    @TimSmith - I'm thinking Zeppelin's Trampled Under Foot?

    @JohnNY - Which camera did you use?
    Steve Minnich
    JohnNY
  • JohnNY
    JohnNY Member Posts: 3,226
    Dropcam Pro
    Contact John "JohnNY" Cataneo, NYC Master Plumber, Lic 1784
    Consulting & Troubleshooting
    Heating in NYC or NJ.
    Classes
  • jonny88
    jonny88 Member Posts: 1,139
    anyone hear of benny hill.perfect music score ,thanks for sharing
    JohnNY
  • bob_46
    bob_46 Member Posts: 813
    wasn't that yakity-sax
    bob
  • Gordy
    Gordy Member Posts: 9,546
    bob said:

    wasn't that yakity-sax


    Sure was! I miss those days of comedy.
  • Gordy
    Gordy Member Posts: 9,546
    Awesome video. I'm sure a few of these will be a very promotional addition to an already awesome web site.
    JohnNY
  • Harvey Ramer
    Harvey Ramer Member Posts: 2,239
    Perfect!
  • AlCorelliNY
    AlCorelliNY Member Posts: 63
    Nice work, John.
    Al Corelli

    JohnNY
  • I thought I saw a tub of NoKorode paste flux with the acid brush stuck through a hole in the top of the container. That's exactly my style as well, but I've been reprimanded.

    8.33 lbs./gal. x 60 min./hr. x 20°ΔT = 10,000 BTU's/hour

    Two btu per sq ft for degree difference for a slab
    JohnNY
  • Leo_G
    Leo_G Member Posts: 89
    Very Kewl!
  • JohnNY
    JohnNY Member Posts: 3,226
    @Alan (California Radiant) Forbes You mean there's another way to do it?
    Contact John "JohnNY" Cataneo, NYC Master Plumber, Lic 1784
    Consulting & Troubleshooting
    Heating in NYC or NJ.
    Classes
  • RobG
    RobG Member Posts: 1,850
    I don't cut a hole, I use a razor knife and cut an X in the lid. It removes any excess flux off the brush as you remove it from the tub.
    jonny88