Welcome! Here are the website rules, as well as some tips for using this forum.
Need to contact us? Visit https://heatinghelp.com/contact-us/.
Click here to Find a Contractor in your area.
sizing indirect for new steam boiler
Options
bob young
Member Posts: 2,177
REPLACEMENT STEAM BOILER .ea too confined for independant water heaters. not familiar with sizing method to provide indirect domestic tank , etc. 14 families. need formula for additional btu load to add to steam boiler. thanx, bob nyc
0
Comments
-
No need to add....
anything. No different that adding an indirect to a hot water boiler. No room for a tankless water heater?0 -
Taco hvav
John Barba has a nice webinar on how to size
Also hotwater.com
Tankless & in NYC see me.0 -
Tankless
Consider takng a Find a Contractor ad.Retired and loving it.0 -
Sizing DHY loads:
Kind of an exercise in futility?
Size the DHW load by the way it is supposed to be added to a boiler, then picking boiler for a 30,000 BTU load at design temperature. When the DHW load calculates to over 100,000?
Its a "Phantom Load". Just put in a bigger indirect.
SNARK Off.0
Categories
- All Categories
- 85.2K THE MAIN WALL
- 3.1K A-C, Heat Pumps & Refrigeration
- 55 Biomass
- 424 Carbon Monoxide Awareness
- 73 Chimneys & Flues
- 1.9K Domestic Hot Water
- 5.2K Gas Heating
- 130 Geothermal
- 160 Indoor-Air Quality
- 3.3K Oil Heating
- 61 Pipe Deterioration
- 885 Plumbing
- 5.9K Radiant Heating
- 376 Solar
- 14.7K Strictly Steam
- 3.2K Thermostats and Controls
- 59 Water Quality
- 49 Industry Classes
- 89 Job Opportunities
- 28 Recall Announcements