Click here to Find a Contractor in your area.
In fairness to all, we don't discuss pricing on the Wall. Thanks for your cooperation.
Need to contact us? Visit

tenant heat metering

rjncontrjncont Member Posts: 1
what is an accurate means to meter tenant heating from a central heat source (oil boiler)? all units are zoned individually 


  • RichRich Member Posts: 2,247
    edited March 2014

    Iworx system can be part of the system also because nobody will just take your math at face value .  You will also require a KNOWN Delta T . There are a few choices of circulator that will closely control Delta T . Taco VDT and Bumble Bee , also Wilo Stratos with IR option .
    You didn't get what you didn't pay for and it will never be what you thought it would .
    Langans Plumbing & Heating LLC 732-751-1560
    Serving most of New Jersey , Eastern Pa .
    Consultation , Design & Installation
    Rich McGrath 732-581-3833
  • Big EdBig Ed Member Posts: 869

    We all know the best option is a separate boiler and oil tank
    I have enough experience to know , that I dont know it all
  • maine rickmaine rick Member Posts: 107

    we use Honeywell AQ control with communicating thermostats. you can set the max temp and check the amount of hours each zone runs. also is outdoor reset ready.
Sign In or Register to comment.


It looks like you're new here. If you want to get involved, click one of these buttons!