Welcome! Here are the website rules, as well as some tips for using this forum.
Need to contact us? Visit https://heatinghelp.com/contact-us/.
Click here to Find a Contractor in your area.

Kickstart THIS!

Eastman
Eastman Member Posts: 927
I'm curious to hear what other ideas people would consider supporting via crowd funding. Smart vents that ensure balance? Variable EDR radiator valves? ???



What's missing from modern steam?

Comments

  • Eastman
    Eastman Member Posts: 927
    The alternatives

    are quite expensive?
  • Joe V_2
    Joe V_2 Member Posts: 234
    what's missing from modern steam?

    Knowledge, of course! that's why we come here.



    actually, I believe steam has plateued because the market is shrinking. A 90%+ efficient boiler maybe?
  • ChrisJ
    ChrisJ Member Posts: 15,588
    Fix that

    How can you make the market grow?

    How can you make a steam system that will compete with other cheaper systems?



    You would think a system with almost no moving parts, no pumps, no fans, could be made to be cheaper then forced hot air, some how.



    I'm all for an outdoor reset for systems like mine.
    Single pipe quasi-vapor system. Typical operating pressure 0.14 - 0.43 oz. EcoSteam ES-20 Advanced Control for Residential Steam boilers. Rectorseal Steamaster water treatment
  • JStar
    JStar Member Posts: 2,752
    ODR

    Mark, I think we have a great candidate in ChrisJ for a launch prototype! He lives a few towns over from me, so callbacks won't be brutal.
  • ChrisJ
    ChrisJ Member Posts: 15,588
    Absolutely

    I'd be glad to be a test subject if the opportunity ever presents it self.
    Single pipe quasi-vapor system. Typical operating pressure 0.14 - 0.43 oz. EcoSteam ES-20 Advanced Control for Residential Steam boilers. Rectorseal Steamaster water treatment
  • I'm ready

    Also, could your control system be adapted to a hot water boiler, for a wider audience?--NBC
  • Steamhead
    Steamhead Member Posts: 16,796
    All Steamed Up, Inc.
    Towson, MD, USA
    Steam, Vapor & Hot-Water Heating Specialists
    Oil & Gas Burner Service
    Consulting
  • Joe V_2
    Joe V_2 Member Posts: 234
    edited February 2014
    well that microsteam system certainly sounds intriguing

    I dont know how I missed that thread.
  • gerry gill
    gerry gill Member Posts: 3,078
    a code approved

    millivolt gas valve would be nice..steam boilers could be rated at higher efficiency i would think if they also used no electricity.
    gwgillplumbingandheating.com
    Serving Cleveland's eastern suburbs from Cleveland Heights down to Cuyahoga Falls.

  • gerry gill
    gerry gill Member Posts: 3,078
    The return of the

    Hoffman #10 main vent would also be nice..the only thing venting faster than that was an open 1/2'' pipe.
    gwgillplumbingandheating.com
    Serving Cleveland's eastern suburbs from Cleveland Heights down to Cuyahoga Falls.

  • Eastman
    Eastman Member Posts: 927
    3/4 inch mains

    I'm looking back through the SelectTemp brochures. The technology seems so relevant to today. Is there a design/install manual out there somewhere?
  • Gordo
    Gordo Member Posts: 856
    Things I'd Like to See With Steam

    1) Hi-Lo firing in all size models.

    2) Accurate low pressure transducers in place of pressuretrols or even Vaporstats with direct digital read-outs of actual system pressures.

    3) A high temperature sensor in the flue gas stream to shut down boiler to prevent dry-firing in the event of LWCO failure.

    4) Sightglasses with ALL brass components and proper blow-down valves.

    5) A main vent with twice the venting as a Gorton #2.

    6) An affordable single pipe steam TRV.

    7) 3 small tube cast iron radiators made in the USA.

    8) Affordable firing cycle/outdoor reset t-stat (as others have said above)

    9) Add an O2 sensor in the flue gas stream, combine with the temperature sensor above add a processor (from an I-phone app) and get real time combustion efficiency...



    *sigh*

    Dream on, I guess.
    All Steamed Up, Inc.
    "Reducing our country's energy consumption, one system at a time"
    Steam, Vapor & Hot-Water Heating Specialists
    Oil & Gas Burner Service
    Baltimore, MD (USA) and consulting anywhere.
    https://heatinghelp.com/find-a-contractor/detail/all-steamed-up-inc