Welcome! Here are the website rules, as well as some tips for using this forum.
Need to contact us? Visit https://heatinghelp.com/contact-us/.
Click here to Find a Contractor in your area.
High rise hydronic heating and chilled water piping supports
Options
dfru
Member Posts: 27
Are there any published standards or guidelines which discuss methods for supporting and anchoring vertical pipe risers in high-rise buildings to allow for expansion and contraction in the piping systems?
Any assistance would be most appreciated.
Any assistance would be most appreciated.
0
Comments
-
Whats the nature of the job
try this...http://www.engineeringtoolbox.com/. Many mfg have engineering guides such Anvil, Grinnell, etc0 -
Any code book
should have guidelines. Out here, we follow IAPMO.8.33 lbs./gal. x 60 min./hr. x 20°ΔT = 10,000 BTU's/hour
Two btu per sq ft for degree difference for a slab0
This discussion has been closed.
Categories
- All Categories
- 85.2K THE MAIN WALL
- 3.1K A-C, Heat Pumps & Refrigeration
- 55 Biomass
- 424 Carbon Monoxide Awareness
- 73 Chimneys & Flues
- 1.9K Domestic Hot Water
- 5.2K Gas Heating
- 130 Geothermal
- 160 Indoor-Air Quality
- 3.3K Oil Heating
- 61 Pipe Deterioration
- 884 Plumbing
- 5.9K Radiant Heating
- 376 Solar
- 14.7K Strictly Steam
- 3.2K Thermostats and Controls
- 59 Water Quality
- 49 Industry Classes
- 89 Job Opportunities
- 28 Recall Announcements