Welcome! Here are the website rules, as well as some tips for using this forum.
Need to contact us? Visit https://heatinghelp.com/contact-us/.
Click here to Find a Contractor in your area.

EDR?

Jeff W_2
Jeff W_2 Member Posts: 57
Hey Dan,

Just in case you update your EDR book...found one not in the book. I'll have to make a guess on this one...

Comments

  • DanHolohan
    DanHolohan Member, Moderator, Administrator Posts: 16,513
    Good one!

    So many radiators, so little time. Thanks for sharing, Jeff.
    Retired and loving it.
  • Steamhead
    Steamhead Member Posts: 16,796
    That looks like an H.B Smith radiator

    which was made for use with a shelf that fit on the top. Possibly an Imperial, Imperial Union or Royal Union- use whatever chart has the closest dimensions. 
    All Steamed Up, Inc.
    Towson, MD, USA
    Steam, Vapor & Hot-Water Heating Specialists
    Oil & Gas Burner Service
    Consulting
  • gennady
    gennady Member Posts: 839
    Air vent

    Just move air vent down. It is too high. Only half of the radiator is working.
This discussion has been closed.