Welcome! Here are the website rules, as well as some tips for using this forum.
Need to contact us? Visit https://heatinghelp.com/contact-us/.
Click here to Find a Contractor in your area.

Normal Height for Gypcrete Pour

I figured may be easier to start new thread instead of burying in my previous post. As far as I can see from Maxxon as normal pour with sleepers has the gypcrete level with the top of the sleepers not below the sleepers as it can create a void.



Did I get this right?

Comments

  • Zman
    Zman Member Posts: 7,561
    Shrinkage

    The condition you have is very common. I think it is unavoidable. We normally glue wood floors over gyp. You could use a trowelable glue to fill the gap.

    Carl
    "If you can't explain it simply, you don't understand it well enough"
    Albert Einstein
  • McMaster
    McMaster Member Posts: 28
    2 Inches

    The Gypcrete in my house, upstairs is about 2" thick.
This discussion has been closed.