Welcome! Here are the website rules, as well as some tips for using this forum.
Need to contact us? Visit https://heatinghelp.com/contact-us/.
Click here to Find a Contractor in your area.

Radiant Heat, Pex Suppleir, Parts, Outdoor Boiler Insulated Line

Please visit our website for all your outdoor boiler, radiant heat, woodstove, hydronic heat, plumbing, pumps, heat exchangers, manifolds, pex, pex fittings, etc.

<a href="http://www.pinnaclesupplyonline.com/">www.pinnaclesupplyonline.com</a>



Dealers make sure to sign up to receive your dealer pricing.

Comments

  • CMadatMe
    CMadatMe Member Posts: 3,086
    Wish It Wasn't

    Pex Alum Pex you were selling for .45 cents for a 300' roll or I'd be jumping all over it and you'd be jumping all over your IT guy...
    "The bitter taste of a poor installation remains much longer than the sweet taste of the lowest price."
  • Harvey Ramer
    Harvey Ramer Member Posts: 2,239
    we don't like seeing advertisements

    In the comment sections.
  • Mark Eatherton
    Mark Eatherton Member Posts: 5,853
    This guy obviously didn't read Dans rules...

    NO ADVERTISING....



    I suspect this post will be gone with the wind as soon as Dan see's it...



    Internet peddlers...



    ME
    It's not so much a case of "You got what you paid for", as it is a matter of "You DIDN'T get what you DIDN'T pay for, and you're NOT going to get what you thought you were in the way of comfort". Borrowed from Heatboy.
  • CMadatMe
    CMadatMe Member Posts: 3,086
    You Should

    Gobble up that PEX before they figure out their price and checkout is selling a 1/2" 300' coil. for .45 cents...
    "The bitter taste of a poor installation remains much longer than the sweet taste of the lowest price."
  • Harvey Ramer
    Harvey Ramer Member Posts: 2,239
    I think that may be $.45 per foot

    They look like a shady bunch to me.
  • PinnacleSupply
    PinnacleSupply Member Posts: 2
    add spot?

    who do i contact about purchasing an add spot?
  • Zman
    Zman Member Posts: 7,569
    Start with

    Try dan@heatinghelp.com
    "If you can't explain it simply, you don't understand it well enough"
    Albert Einstein
This discussion has been closed.