Welcome! Here are the website rules, as well as some tips for using this forum.
Need to contact us? Visit https://heatinghelp.com/contact-us/.
Click here to Find a Contractor in your area.

Ray boiler

lchmb
lchmb Member Posts: 2,997
Has anyone installed or serviced the Ray condensing boiler? Curious as to opinions on the system...

Comments

  • lchmb
    lchmb Member Posts: 2,997
    no one?

    .....
  • Tim Potter
    Tim Potter Member Posts: 273
    Recent update to an older post

    I saw an update to this post:



    http://www.heatinghelp.com/forum-thread/130753/How-is-rAy-these-days



    Tim
    Winter Park, CO & Arvada, CO
  • lchmb
    lchmb Member Posts: 2,997
    thanks

    I should have gone looking..if it's heating related it's here some place...Thanks!!
  • Tim McElwain
    Tim McElwain Member Posts: 4,612
    Tom I have

    an old Ray in my center which has the faulty ignition control on it and I have to get it updated. When I do I will have some information on the Ray and what is happeneing with it.
  • lchmb
    lchmb Member Posts: 2,997
    Thanks Tim

    Much appreciated!!
  • Plumbertim
    Plumbertim Member Posts: 3
    Ray boiler

    I have one installed in my home with in-floor on two zones and an triangle smart 40. My issue is trying to find an electrician to wire it. I installed a primary-secondary loop system and can't get it to run correctly. He left today and I get home and find out the heating is working while my indirect is calling for heat. He took out my taco 6 zone box and kept in the taco circuit relay. ??????   I am trying to prevent high water temp. to run underneath my hardwood floor so it does not warp. Thanks to my hardwood installer, I now have a hole in my basement ceiling trying to locate which zone is leaking. Any one have a tylenol?
    Wanting to do it right
This discussion has been closed.