Welcome! Here are the website rules, as well as some tips for using this forum.
Need to contact us? Visit https://heatinghelp.com/contact-us/.
Click here to Find a Contractor in your area.

Timmie-- honeywell gas valve question.

Options
gerry gill
gerry gill Member Posts: 3,078
in Gas Heating
on the new atmospheric boilers with honeywell gas valves..the regulator adjusting screw used to be a straight slot type screw..now its something that a straight slotted screwdriver fights with..it looks like a star-ish shape..what is it? is it torx?
gwgillplumbingandheating.com
Serving Cleveland's eastern suburbs from Cleveland Heights down to Cuyahoga Falls.

Comments

  • Tim McElwain
    Tim McElwain Member Posts: 4,621
    Options
    Is this a Honeywell

    VK 8115 valve? if so it is a European Honeywell valve. Depending on whose boiler it is located it is not to be touched. There will typically be a throttling screw on the valve/draft inducer set up. With make, model and whose boiler I can give some further information.
  • gerry gill
    gerry gill Member Posts: 3,078
    Options
    no its a VR something..

    when i go back to skim i'll get the valve numbers..its oem on the peerless atmospheric steamer 64-08..
    gwgillplumbingandheating.com
    Serving Cleveland's eastern suburbs from Cleveland Heights down to Cuyahoga Falls.

  • Tim McElwain
    Tim McElwain Member Posts: 4,621
    Options
    Gerry e-mail me a picture

    if you can and I will take a look at it. I am at gastc@cox.net
This discussion has been closed.

Categories