Click here to Find a Contractor in your area.
Welcome! Here are the website rules, as well as some tips for using this forum.
Need to contact us? Visit

Burner crossover

Harvey_2 Member Posts: 27
I have a Weil-Mclain LG-6 with cast iron burners. The flame crossover is rusted thru. NO replacement available from factory. Any ideas other than multiple pilot burners? Thanks in advance


  • Tim McElwain
    Tim McElwain Member Posts: 4,487
    Is it possible to send a picture of

    the crossover and burner set up so I can advise you what to do?
This discussion has been closed.