Welcome! Here are the website rules, as well as some tips for using this forum.
Need to contact us? Visit https://heatinghelp.com/contact-us/.
Click here to Find a Contractor in your area.

Triangle tube

Options
Derek_4
Derek_4 Member Posts: 13
in Gas Heating
Does any body know what E-14 trouble code means. The manual says it is a internal control failure. I don't have a trouble shooting manual on hand to tell me witch control it is.

Comments

  • Tim McElwain
    Tim McElwain Member Posts: 4,625
    Options
    The "E" codes for Internal Error

    are sort of general catch all codes. The Service Technicians Troubleshooting Guide states  E-14 Internal Error - Reset the boiler control module and retry ignition sequence and boiler operation. If problem continues, replace the control module.



    It is my experience that these internal errors can be caused by power surges, lighting storms, brown outs, and other electrical events even someone turning the power switch on and off rapidly. Try it several times if it does not go into error code again you can probably feel safe leaving it. If it keeps going into error code change the module.
This discussion has been closed.

Categories