Welcome! Here are the website rules, as well as some tips for using this forum.
Need to contact us? Visit https://heatinghelp.com/contact-us/.
Click here to Find a Contractor in your area.

Pex Support

Justin Topel
Justin Topel Member Posts: 65
Does anyone happen to know the name of the company who manufactures the 90 degree bends for pex tubing that are snap together blocks that keep the tubing in place?  I have seen them years ago, but cannot seem to remember for the life of me who makes them.  Or if there is another product that you prefer to use, please tell.

Thanks

Mister T

Comments

  • eComfortUSA
    eComfortUSA Member Posts: 11
    edited August 2009
    re: Pex Support

    Hello Mister T.

    Did this is by any chance sound familiar to you?

    Plastic Elbow Sleeves are used for tubing protection at all penetration point. These products are made by few company's like Viega and i don't remember second name. I know we do have source for them. Call any local supply house or you can visit us at www.ecomfortusa.com, as for tech support, ate least we can lead you to right direction.

    Victor.
    eComfortUSA
  • Jean-David Beyer
    Jean-David Beyer Member Posts: 2,666
    Do you mean this stuff?

    http://pex-pal.com/
  • eComfortUSA
    eComfortUSA Member Posts: 11
    Pex Support

    No, this will work but it will cost you crazy money, Look inside attachment, page 9

    Victor.
    eComfortUSA
  • Justin Topel
    Justin Topel Member Posts: 65
    Thanks for the info

    Thanks,



    That is exactly what I was needing to find.  It should work out quite well.  It is always quite amazing how many different products for radiant systems out there.  Thanks again for the help!



    Mister T
  • eComfortUSA
    eComfortUSA Member Posts: 11
    Pex Support

    No problem, you are welcome

    Victor
    eComfortUSA
This discussion has been closed.