Welcome! Here are the website rules, as well as some tips for using this forum.
Need to contact us? Visit https://heatinghelp.com/contact-us/.
Click here to Find a Contractor in your area.
Welding flanges to 3-1/2\" Pipe
Options
Steve Garson_2
Member Posts: 712
I have a boiler with three steam mains that are connected with Victualic sprinkler system joints. Really!
To replace the boiler, I need to make proper connections to these pipes. I know that we don't talk price but can anyone just ballpark what range I should expect to pay to have flanges welded on these pipes?
Steve
To replace the boiler, I need to make proper connections to these pipes. I know that we don't talk price but can anyone just ballpark what range I should expect to pay to have flanges welded on these pipes?
Steve
Steve from Denver, CO
0
Comments
-
welding
Best bet it to just call a local welding shop. Usually done the joint. My guy does it that way and the more help I give him, the less the price...things like having evverything ready when he arrives, pulling his welding leads and assisting with anything he needs gets the good done quickly.
To Learn More About This Professional, Click Here to Visit Their Ad in "Find A Professional"0 -
Thanks Al.
Steve0
This discussion has been closed.
Categories
- All Categories
- 85.2K THE MAIN WALL
- 3.1K A-C, Heat Pumps & Refrigeration
- 55 Biomass
- 424 Carbon Monoxide Awareness
- 73 Chimneys & Flues
- 1.9K Domestic Hot Water
- 5.2K Gas Heating
- 130 Geothermal
- 160 Indoor-Air Quality
- 3.3K Oil Heating
- 61 Pipe Deterioration
- 884 Plumbing
- 5.9K Radiant Heating
- 376 Solar
- 14.7K Strictly Steam
- 3.2K Thermostats and Controls
- 59 Water Quality
- 49 Industry Classes
- 89 Job Opportunities
- 28 Recall Announcements