Welcome! Here are the website rules, as well as some tips for using this forum.
Need to contact us? Visit https://heatinghelp.com/contact-us/.
Click here to Find a Contractor in your area.

Ultra-Finn vs staple up

Options
Jim_109
Jim_109 Member Posts: 45
in THE MAIN WALL
What effect does heat loss have on Ultra-Finn vs staple up at the same floor temperature? rdtps70@hotmail.com

Comments

  • Kevin_in_Denver_2
    Kevin_in_Denver_2 Member Posts: 588
    Options


    Ultra-Fin can supply more heat to a given room, but it would mean a higher floor temperature.

    There was an error rendering this rich post.

  • jp_2
    jp_2 Member Posts: 1,935
    Options
    R U sure about that?

    ultra fin work on convection, staple up with heavy plates works by good old conduction.
  • hot_rod
    hot_rod Member Posts: 22,158
    Options
    define \"staple up\"

    I prefer UF to bare tube stapled against the floor. If that is how you define staple up.

    UF work nice if you are adding to a HW baseboard system, no temperature mixing required.

    Best method, for retro fit would be the extruded transfer plates, with a mixed down temperature. Usually 100- 120 will work with transfer plates.

    hr
    Bob "hot rod" Rohr
    trainer for Caleffi NA
    Living the hydronic dream
This discussion has been closed.

Categories