Welcome! Here are the website rules, as well as some tips for using this forum.
Need to contact us? Visit https://heatinghelp.com/contact-us/.
Click here to Find a Contractor in your area.
size of circ pump and flat plate exchanger
Tom Noftle
Member Posts: 16
I want to heat 2 - 3/8x225'radiant loops in closed loops with an on demand water heater using a flat plate heat exchanger. What size exchanger do I need and what size pumps do I need (one on the tubing side and one on the water heater side?)
0
Comments
-
Flatplate
The people at Flatplate are very helpful. I would contact them for specific numbers for their equipment. Their literature is also very good.0
This discussion has been closed.
Categories
- All Categories
- 85.2K THE MAIN WALL
- 3.1K A-C, Heat Pumps & Refrigeration
- 55 Biomass
- 424 Carbon Monoxide Awareness
- 72 Chimneys & Flues
- 1.9K Domestic Hot Water
- 5.2K Gas Heating
- 129 Geothermal
- 160 Indoor-Air Quality
- 3.3K Oil Heating
- 60 Pipe Deterioration
- 879 Plumbing
- 5.9K Radiant Heating
- 375 Solar
- 14.6K Strictly Steam
- 3.2K Thermostats and Controls
- 58 Water Quality
- 49 Industry Classes
- 89 Job Opportunities
- 28 Recall Announcements