Welcome! Here are the website rules, as well as some tips for using this forum.
Need to contact us? Visit https://heatinghelp.com/contact-us/.
Click here to Find a Contractor in your area.

Climate Panel Install (Ray L)

J.C.A._3
J.C.A._3 Member Posts: 2,980
Guess I should be wearing my glasses.... The bottom is flat (as opposed to the top.).and it kind of looks like a test ball stuck in the floor. Makes perfect sense NOW. JCA

Comments

  • Ray Landry_2
    Ray Landry_2 Member Posts: 114
    The staplers and mitre saws have been getting a workout....

    Here's some pics of a viega climate panel project I'm working on. 8000sf home that is a geothermal retro. The home has hydro air, Carrier infiniti A/C, 2 ERV's, and over 3000 sf of in floor heat; Powered by 2 Buderus gb142's and a st 300 79g indirect. Got the manifolds tied in and pressure tested today, and boilers are pretty much all piped. Still need to wire, gas pipe, purge, tie in AHU's, and do the condensate piping, but we've got the bulk done. More pics to come when work progresses. My camera was dying so the photo quality is sub-par.
  • Rodney Summers
    Rodney Summers Member Posts: 748


    as usual ray you do nice work ;-)
    looks real good thanks for posting the pictures.
    i enjoy looking at them

    Jason
  • J.C.A._3
    J.C.A._3 Member Posts: 2,980
    Ray,

    Outstanding layout. My only question is about pic # 31...Is that a toilet flange? Chris
  • Rodney Summers
    Rodney Summers Member Posts: 748


    chris looks like a role of tape and a spoil of #14 wire
  • JimL
    JimL Member Posts: 21


    Nice...What's the final floor choice over the Viega?
  • Ray Landry_2
    Ray Landry_2 Member Posts: 114


    Thanks for the comments. Jim the entire first and part of the second floor is going to be brazilian cherry hardwood, while the bathrooms are going to be hardybacker and tile.
This discussion has been closed.