Team effort

lchmb

I'd say you guy's make a good team!! It's alway's nice to see someone who takes pride in his work..

Jim Burke comfort zone

Joint adventure

Installed this buderus with the help from mad dog & albert.
Removed a 6 sect. national cast iron monster with little room
down stairway had to split boiler in sections to get up & carried new buderus 215 4 section down.
Old boiler was filthy from years of neglect was just vac (yea right].
Custumer not easy to please but we had old boiler out & new boiler in and up and running in 1 day and still waiting to get finale payment.
Custumer wanted all the bells & whistles to boot .
job has 2 zones baseboard & radiators & 2 zones of radiant done by his so called plumber.
Can't say enough about buderus product & tech support .
Matt(mad dog) & I have done tag team jobs and always seem to
get it done.
To bad we didn't need a drop header for this one.
Can't wait till next week when we install another buderus GB
will be a little kinder on the back.

Weezbo

The piping Looks Clean *~/:)

i get into that too:) then when you shoot high heat to it it shines like Gold:) or if you run really hot water through the system it makes a crimson header:) the fittings all look clean without large conglomerations, splashed about the walls and floor:) and cascading liberally down the pipes

Mad Dog_2

Thanks guys

Before I met Jimmy I was a very good and neat solderer. He helped me get to the next level...especially with the upside down joints. We all work very well together....same philospohy and dedication. Mad Dog

To Learn More About This Professional, Click Here to Visit Their Ad in "Find A Professional"

Mad Dog_2

Look at the inside of the passages.......

I read recently that every 1/16" of soot results in a 1-2% loss of efficiency. With the Buderus Ecomatic control...these oil bills will drop quite a bit. Mad Dog