Click here to Find a Contractor in your area.
Welcome! Here are the website rules, as well as some tips for using this forum.

If you've found help here, check back in to let us know how everything worked out.
It's a great way to thank those who helped you.
Need to contact us? Visit https://heatinghelp.com/contact-us/.

SOLD Cast Iron Radiators for Sale

MichelaMichela Member Posts: 3
edited August 16 in THE MAIN WALL
SOLD
Fully functional, ornate Pierce hot water, cast iron radiators for sale.

I have 9 in total, pick up ASAP, located in White Plains, NY, $1350 for the lot, cash and collect only. In detail:

2 small (6 tubes) 14“w x 8“d x 38“ h

3 large (22 tubes) 57“w x 9“d x 22“h

4 medium (10 tubes) 24“w x 9“d x 38“h

Comments

  • Steve MinnichSteve Minnich Member Posts: 2,474
    If I was in your area rather than Chicago, I'd scoop them up tonight.
    PHC News Columnist
    Minnich Hydronic Consulting & Design
  • SteamheadSteamhead Member Posts: 13,349
    Another fine old system getting the death penalty................
    All Steamed Up, Inc.
    "Reducing our country's energy consumption, one system at a time"
    Steam, Vapor & Hot-Water Heating Specialists
    Oil & Gas Burner Service
    Baltimore, MD (USA) and consulting anywhere.
    https://heatinghelp.com/find-a-contractor/detail/all-steamed-up-inc
  • JakeCKJakeCK Member Posts: 132
  • Solid_Fuel_ManSolid_Fuel_Man Member Posts: 1,754
    Nah....those will be replaced with superior scorched air! So much more efficient than those boat anchors....

    I'm already a radiator hoarder, gotta stop!
    Serving Northern Maine HVAC, and Controls
  • Steve MinnichSteve Minnich Member Posts: 2,474
    Here we go again.
    PHC News Columnist
    Minnich Hydronic Consulting & Design
  • Solid_Fuel_ManSolid_Fuel_Man Member Posts: 1,754
    I hope you read my sarcasm... cant help poking the bear sometimes.
    Serving Northern Maine HVAC, and Controls
  • Steve MinnichSteve Minnich Member Posts: 2,474
    It's all good. We just don't know everyone's story so I'm just suggesting that we're a little slower to judge. That's all. For all we know, they may have opted for panel rads?
    PHC News Columnist
    Minnich Hydronic Consulting & Design
  • ChrisJChrisJ Member Posts: 10,238

    It's all good. We just don't know everyone's story so I'm just suggesting that we're a little slower to judge. That's all. For all we know, they may have opted for panel rads?

    Agreed.
    However, I don't understand where $1350 comes from. That's certainly not the scrap value of cast iron.

    Single pipe quasi-vapor system. Typical operating pressure 0.14 - 0.43 oz. EcoSteam ES-20 Advanced Control for Residential Steam boilers. Rectorseal Steamaster water treatment
  • MichelaMichela Member Posts: 3
    Chris J: These are not salvage items, but meant for reuse. Also I‘ve seen them sell for a lot more. If you are interested make me a serious offer.
  • STEVEusaPASTEVEusaPA Member Posts: 3,478
    Are they currently hooked up to your system? Or already removed?
    steve
  • MichelaMichela Member Posts: 3
    Steve: removed as of 2 days ago.
  • Danny ScullyDanny Scully Member Posts: 1,219
    @michela, what are they being replaced with?
Sign In or Register to comment.

Welcome

It looks like you're new here. If you want to get involved, click one of these buttons!