Welcome! Here are the website rules, as well as some tips for using this forum.
Need to contact us? Visit https://heatinghelp.com/contact-us/.
Click here to Find a Contractor in your area.

Weil-McLain & Caleffi Installation

JohnNY
JohnNY Member Posts: 3,291
This is a hard installation to photograph but you get the idea.



We're happy with this one.



It's a large Manhattan residence with three WM 310 boilers and two 80-gallon indirects.



I know, I know. It's a lot of heat and hot water, but this is how it goes in this town.
Contact John "JohnNY" Cataneo, NYC Master Plumber, Lic 1784
Consulting & Troubleshooting
Heating in NYC or NJ.
Classes

Comments

  • SWEI
    SWEI Member Posts: 7,356
    Tight quarters

    looks like a nice installation.
  • Snowmelt
    Snowmelt Member Posts: 1,425
    Hall of fame

    Ever post on hall of fame hvac
  • JohnNY
    JohnNY Member Posts: 3,291
    Nope.

    I don't even know what that is.

    I'll take a look though.

    Thanks!
    Contact John "JohnNY" Cataneo, NYC Master Plumber, Lic 1784
    Consulting & Troubleshooting
    Heating in NYC or NJ.
    Classes
  • icesailor
    icesailor Member Posts: 7,265
    Links:

    Here's a link to HVAC-Talk to the Wall of Pride.

    Scroll down to the very first post and click on each individual JPEG.

    Check out the one about "How's My Brazing" for a real Piping Picasso.



    http://hvac-talk.com/vbb/showthread.php?1494431-Viessman-boiler-project
  • JStar
    JStar Member Posts: 2,752
    Nice

    If somebody took the insulation off, would the solder joints still look perfect as always?
  • JohnNY
    JohnNY Member Posts: 3,291
    That's a nice comment, Joe. Thanks.

    Actually this was mostly a pro-press job.
    Contact John "JohnNY" Cataneo, NYC Master Plumber, Lic 1784
    Consulting & Troubleshooting
    Heating in NYC or NJ.
    Classes
  • RobG
    RobG Member Posts: 1,850
    Beautiful Work

    Beautiful work! As usual, the mechanical room was an afterthought to the architect. Is there even room to replace the equipment down the road?

    Rob
  • heatpro02920
    heatpro02920 Member Posts: 991
    Very nice as always...

    I wish my customers had pockets like yours, I am going to move to NY, lol...



    I did a job with 4 alpines and they were in a "tunnel" like that, so I tilted them at an angle so you had a little more room to work on them...
  • hot_rod
    hot_rod Member Posts: 23,382
    Sweet!

    keep up the great work.
    Bob "hot rod" Rohr
    trainer for Caleffi NA
    Living the hydronic dream