Welcome! Here are the website rules, as well as some tips for using this forum.
Need to contact us? Visit https://heatinghelp.com/contact-us/.
Click here to Find a Contractor in your area.
Another GB install
deltat
Member Posts: 19
Looks great! What type of unistrut hangers are you using?
0
Comments
-
GB
This job is a work in progress.
The Log home will have seven zones.
2 zones split off one manifold and temp.
1 small radiant zone for master bath.
1 zone in slab for basement gameroom.
1 for some baseboard.
And two for fan coil units for entire space as supplement. In addition a large
stone fireplace.
I'm trying the I-series with reset for the radiant zones.
The red and blue pex is Wirsbo aquapex plus.0 -
That better not be one of MY GB's!!!
Just kidding!
Looks great. I have been looking at those Taco I-series valves. Let me know how you like them. I have a little job I am starting tomorrow that has two small rad zones. Those valves might me just what the doctor ordered.
Let's pressure Rick to make good on the lunch soon!
Mark H
To Learn More About This Professional, Click Here to Visit Their Ad in "Find A Professional"0 -
How can I...
Pry you genius specialists away from your work and get you in the same place? Devan why did I agree to let Joe handle your account? Stupid I guess... You and Mark & Darin should agree to meet somewhere in the middle and I will let N&S buy you lunch or dinner. You name it...You guys are masters. I am happy to be of service.
Rick & the rest of the N&S family0 -
I'm Trying to post and start a new thread, How do you get into the proper window to post? Thanks0 -
From the Forum page
look for the "New Thread" link.
Click it and have at it!
Mark H
To Learn More About This Professional, Click Here to Visit Their Ad in "Find A Professional"0 -
Well I don't want to speak for Singh but.....
a steak dinner could free me up for a bit!
Let's see what works for Singh.
And who invited Darin?!?!?!?
Mark H
To Learn More About This Professional, Click Here to Visit Their Ad in "Find A Professional"0 -
DHW circ
Singh
Great looking job.You may want to turn the cartridge on your domestic circ so the wiring connections are on the side not the bottom.Just remove the allen screws and turn clockwise 90 degrees.You can see it on my post from a couple of days ago.GB142#5
Good Luck
Dobber0 -
Thanks
Thanks for the nice words.
The GB is a great product, definetly my first choice.
Steak sounds good, screw the cow gods : )
Rick, Joe is doing right by me, but you still can pay for lunch.
Dobber, Thanks ,when I wrap things up and wire up the pumps, I will
rotate the pump.0 -
Rick
Include a good Scotch and Hunt will be running over.
By the way Mark , I spoke to Darrin about the I-Radiant valve and we have been very happy so far with it. Fills a nice nitch. I find the boiler return sensor can be problematic on older retro jobs, but everything else is nice.
I bought one for my house, that should say it.
Scott
To Learn More About This Professional, Click Here to Visit Their Ad in "Find A Professional"0 -
Looks good so far
The install looks nice and neat. Like the little details to help service the system in the future.0 -
No Scotch!
Cannot cover the bar bill with Mark! We would go broke!!!
0 -
Ask the poor canadian dude from Hi-V
We had went to a seminar on Hi velocity systems one night and the hi vee dude asked if we wanted to get a "few" drinks and talk some more about the systems. $300.00 bucks later and bleeding eardrums to boot, I don't think we will be out on Hi Vee's dime in the near future.
Darin0 -
GB's and proPanel 311P
I'll buy dinner for Mark, Darin, Devan and Rick if you can tell me who installed this job....Rick's answer doesn't count.....These products are number one in performance and
in appearance as well...Scotch is included but it has to be in an Albany restaurant....Steve Z0 -
The answer is
Steve Z of Gus Z associates.
Very nice!
Mark H
To Learn More About This Professional, Click Here to Visit Their Ad in "Find A Professional"0 -
Glenfidich
Hold out for the single malt.
Dobber0 -
Set the Date
Wow Z-Man it's on you. Who said Reps can't install? Pick a place & a date.
Thanks,
Rick
(nice install)0 -
Well,Well,Well
not too shabby for someone with normally "clean hands". Good Job, Bud.
Darin0 -
You boys are lucky I didn't show up
That bar bill would be $600 and Mark and I would be sprinting thru the lobby rough housing...he's a fast little sob! Mad Dog
To Learn More About This Professional, Click Here to Visit Their Ad in "Find A Professional"0 -
Steve Z
It wouldn't be nice for a rep to back out on a deal would it???
Surely you wouldn't want the other contractors that view this site to think that you weren't a man of your word???
So when is dinner?
Mark H
To Learn More About This Professional, Click Here to Visit Their Ad in "Find A Professional"0 -
Steve Z
You should know by all of our
work that we pay attention to detail. You didn't think we were going to forget did you? I like Lobster. Thanks Bud
Darin0 -
-
Z-Man
The Gods have spoken...0 -
cush-clamps
Thank You.
The clamps are called cush clamps, purchased from my local supplier.0 -
Mark & Darin
It's time to turn up the heat...0 -
Tell me more
about the "Prestige" Rick.
Mark H
To Learn More About This Professional, Click Here to Visit Their Ad in "Find A Professional"0 -
Sizzle Sizzle
Triangle Tube makes some sweet products. A solid AMERICAN company.
Darin0 -
Man
This guy is really intent on not buying the dinner he promised!
Whooda thunkit???
Mark H
To Learn More About This Professional, Click Here to Visit Their Ad in "Find A Professional"0 -
Shake the magic \" Eight Ball\"
It says " It is decidedly so"
Darin0 -
Wink wink
The magic 8 ball.
Mark H
To Learn More About This Professional, Click Here to Visit Their Ad in "Find A Professional"0 -
answer
appears cloudy. Try again later.
To Learn More About This Professional, Click Here to Visit Their Ad in "Find A Professional"0 -
Uhhh errr, no
Not until you stop installing GB142's. Darin is Jason happy with the Prestige?
Rick0 -
Rick
I have not talked to my bro yet. I will find out this weekend.
Darin0 -
Dinner with Steve Z
If you guys keep talking about the Prestige, then
dinner plans might have to be postponed.
Buderus GB only , Right????
Mcdonalds if you install Prestige and a nice Italian
dinner if GB's remain the topic.0 -
HEY STEVE Zzzzz
What happened? You disappeared. We can forgive BUT we will never forget...
Still hungry,
Rick, Mark, Devan & Darin0
This discussion has been closed.
Categories
- All Categories
- 86.3K THE MAIN WALL
- 3.1K A-C, Heat Pumps & Refrigeration
- 53 Biomass
- 422 Carbon Monoxide Awareness
- 90 Chimneys & Flues
- 2K Domestic Hot Water
- 5.4K Gas Heating
- 100 Geothermal
- 156 Indoor-Air Quality
- 3.4K Oil Heating
- 63 Pipe Deterioration
- 917 Plumbing
- 6.1K Radiant Heating
- 381 Solar
- 14.9K Strictly Steam
- 3.3K Thermostats and Controls
- 54 Water Quality
- 41 Industry Classes
- 47 Job Opportunities
- 17 Recall Announcements