Welcome! Here are the website rules, as well as some tips for using this forum.
Need to contact us? Visit https://heatinghelp.com/contact-us/.
Click here to Find a Contractor in your area.

steam piping

ernie_3
ernie_3 Member Posts: 191
in THE MAIN WALL
I have a 4" header on a Smith boiler, can I pipe the equalizer in 2" ?

Comments

  • Anthony Menafro
    Anthony Menafro Member Posts: 199
    Equalizer

    I would say yes, but check your manual. If you don't have one, go on line.

    Anthony Menafro
  • ernie_3
    ernie_3 Member Posts: 191
    my bad

    The header is 5" and has a minimum 2 1/2" equalizer. Never easy is it? When I break into the 5" header I was thinking of using expando instead of wickup/dope....thoughts?
This discussion has been closed.

Categories