Welcome! Here are the website rules, as well as some tips for using this forum.

Need to contact us? Visit https://heatinghelp.com/contact-us/.

Click here to Find a Contractor in your area.

Honeywell AQ475 Problems

ishmael2k · 2006-01-02 15:19:37

Hi Scott, I have come to the conclusion that with my house and system the reset is not going to do much for me. I am still using it, set to 135º low and 170º high. The sensor (Mounted after the pump, on copper with insulation over it) seems to be approximately 15º off and does not react very quickly at all. The main reason…

Comments

Robert_15 Member Posts: 62

January 2006

hey larry i was wondering how your aq is working out i iv'e moved the supply sencor closer to the supply outlet but it is still off by 10-15f. how did you put your supply sencer in the well without any any ports?

0

This discussion has been closed.

Honeywell AQ475 Problems

Comments

Categories