To get email notification when someone adds to a thread you're following, click on the star in the thread's header and it will turn yellow; click again to turn it off. To edit your profile, click on the gear.
The Wall has a powerful search engine that will go all the way back to 2002. Use "quotation marks" around multiple-word searches. RIGHT-CLICK on the results and choose Open Link In New Window so you'll be able to get back to your results. Happy searching!
In fairness to all, we don't discuss pricing on the Wall. Thanks for your cooperation.

Steve Thompson (Taco) ✭✭✭


Steve Thompson (Taco)
Last Active


  • Getting this far requires gumption, something you have in spades.
    March 2
  • Steve Thompson (Taco) was promoted to Level 3.
    January 28
  • You received 25 Likes. You're posting some good content. Great!
    October 2015
  • Thanks for sticking with us for 3 years.
    January 2015
  • mars
    Steve thanks for your input i do appreciate it. If I have say a Triangle Tube TriMax 110 with the built in circulator for the primary loop, and I know this may be out of your preview what do you think is the consequences of the boiler firing at low fire with the 007 circ that is on the boiler for the primary pump. if i have only one 20,000 btuh zone calling and have a gpm internal to the boiler that is pumping to the 110,000 btuh is there any deficit in efficiency. Would it make sense for the boiler to control the internal boiler speed of the pump to accommodate the boiler fire rate? I'm tossing this out there as I do not know the answer but am inclined to ask the question. Thanks Matt
    January 2015
  • hot rod
    Hi Steve, thanks for the return offer, give me a ship to address.
    December 2014


It looks like you're new here. If you want to get involved, click one of these buttons!