Welcome! Here are the website rules, as well as some tips for using this forum.
Need to contact us? Visit https://heatinghelp.com/contact-us/.
Click here to Find a Contractor in your area.

Princess Model

Harvey Ramer
Harvey Ramer Member Posts: 2,239
Anyone have any idea where I could find an HB Smith Princess Model Rad. 19 sections, floor standing, 32' tall.



The one that is currently installed has started leaking out of the bottom of the first section. Maybe about a teaspoon full in a couple days.



Harvey

Comments

  • kcopp
    kcopp Member Posts: 4,418
    Do you...

    have a picture? or drawing? kcopp
  • Harvey Ramer
    Harvey Ramer Member Posts: 2,239
    edited June 2014
    Pic

    I don't have a pic, unfortunately. I could get one easy enough I suppose. It has a plain look. Rounded top and only 2 tubes per section.



    Actually, this is the one. https://archive.org/details/DirectRadiators Two column Princess. Just flip through that book thingy till you get to the right page.



    Harvey
  • Steamhead
    Steamhead Member Posts: 16,796
    Is the leak

    at the joint between two sections? If so, all you probably need is to replace the push-nipple that joins the sections.
    All Steamed Up, Inc.
    Towson, MD, USA
    Steam, Vapor & Hot-Water Heating Specialists
    Oil & Gas Burner Service
    Consulting
  • Harvey Ramer
    Harvey Ramer Member Posts: 2,239
    Leak

    I misspoke. The leak is in the first regular section, not the one with feet on it. The drop of water appears on the very bottom of the section, as it most certainly would. I ran my finger along the bottom of the section on each side of the drop and felt no wetness. I would appear that it's leaking through the seam in the section itself.



    Harvey
  • Paul Pollets
    Paul Pollets Member Posts: 3,656
    A1

    Try A1 for used sections. They are in Somerville, MA.

    http://www.antiqueplumbingandradiators.com/